AUSTRIAN BELTING TECHNOLOGY Industrial solutions from Austria
Sidewall & cleated belts · ABT-SW-004

Sidewall Conveyor Belt

Belt with fitted sidewalls for lateral material guidance.

Sidewall Conveyor Belt – illustrative image
AI-generated concept visualisation · not an ABT product photo

Sidewall and cleated belts extend conveyor technology to steep and space-saving routes. The sidewall conveyor belt is designed for applications where conveyed material must be guided laterally and spillage over the belt edge prevented. Belt with fitted sidewalls for lateral material guidance. In the ABT catalogue the product is listed under the internal reference ABT-SW-004; this reference identifies your enquiry and is not a certified manufacturer part number.

Technical design: Sidewalls are vulcanised or welded onto the base belt and can be configured as smooth or corrugated. Typical material options include rubber or plastic base belt and sidewalls made of compatible material. The right combination depends on the conveyed material, operating conditions, environment and the existing plant. This design is particularly suitable for fine-grained, free-flowing bulk materials and for non-troughed conveyor systems.

Key features include lateral material guidance, smooth or corrugated walls, combinable with cleats and suitable for flat support structures. Typical fields of application are granulates and powders, food and animal feed precursors, recycling fractions and small parts conveying. Depending on the process, these environments involve different loads such as abrasion, moisture, temperature, contact with media or changing loads, which should be assessed together during selection.

Configurable options include wall height, wall profile, free edge margin and combination with cleats. The specific design is agreed per project; ABT states binding dimensions, performance values, certifications or delivery times only after technical clarification and review of the manufacturer documentation. For operators, the benefits lie in reduced material loss, cleaner conveying route and flat design feasible.

A qualified enquiry is helped by details of the conveyed material, throughput, belt width, centre distance, inclination, speed, ambient temperature and existing splice type. Photos of the existing installation, rating plates or drawings make the assessment easier. Safety note: Sidewalls must have sufficient clearance around pulleys.

Across the full life cycle, regular visual inspection of the sidewall Conveyor Belt as part of plant inspection is worthwhile. Wear patterns, contamination, unusual noise or tracking deviations give early indications of required action. Documented maintenance intervals, suitable spare parts and trained staff help to avoid unplanned downtime and protect the investment in the long term.